8.16 HP Utility Meter User's Guide (June 2010)

Figure 4-7 Utility Meter GUI Managed Devices
If the physical disk arrays that are managed by the device do not appear, see Section 3.5.1: “Configure
a Device (Add Device)”.
If the Utility Meter GUI's Managed Devices Tree (left pane) contains all of the switches and SMI-S Agents,
then you have verified that they are configured and metered by the Utility Meter.
4.9.2 Verifying a Device is Connected to the Utility Meter
To verify that a device is connected to the Utility Meter, see Section 3.6.2: “Device Connection”.
If there is a problem with the connection from a device to the Utility Meter, you need to troubleshoot the
Utility Meter. For storage-device troubleshooting information, see Section 5.3.2: “Troubleshooting a Storage
Device”.
4.9.3 Verifying the Connection from the Utility Meter to HP
To verify the connection from the Utility Meter to HP for a URS installation, see Section 4.4: “Verifying
Connectivity from the Utility Meter to HP”.
If there is a problem with the connection from the Utility Meter to HP, you need to troubleshoot the Utility
Meter. For Utility Meter troubleshooting information, see Chapter 5: “Troubleshooting the Utility Meter”.
90 Verifying Utility Meter Operation