8.16 HP Utility Meter User's Guide (June 2010)

3. In the End-to-end connectivity verification page, enter the System Serial Number
and the ID Number, and then click the Next button.
NOTE: The ID Number can be found in the <UniqueIdentifier> tag in a PPU usage report. For
a PPU WBEM Partition/Server it can also be found by using the View Device feature (see Section 3.5.3:
“View Device”).
Figure 4-2 End-to-End Connectivity Verification Input Page
4. If you see the following page, then the PPU partition is properly connected to the UPS portal through
the Utility Meter.
Figure 4-3 End-to-End Connectivity Verification Page
The date and time in the Time stamp field should be similar to the date and time you performed the
meter connectivity verification test.
4.7 Verifying a PPU Partition 85