8.16 HP Utility Meter User's Guide (June 2010)

Figure 3-17 Modify Device Dialog Box
5. To change a non-URS disk array to a URS disk array, in the Modify Device dialog box's Is URS
Device field, click in the check box. URS devices will have a check mark in their check box.
To change a URS disk array to a non-URS disk array, click in the check box to remove the check mark.
You can also modify other fields for the device in this dialog box.
6. Click the Modify button to make the changes. You can cancel any modifications by clicking the Done
button, which closes the dialog box without making changes.
7. After you have completed the changes, click the Done button to close the Modify Device dialog
box.
NOTE: If an error occurs with the requested changes, the dialog box remains open and the Status
window displays the error message.
After you change a non-URS disk array to a URS disk array and there are no errors, the non-URS disk array
now appears as a URS disk array (labeled as a URS Device) in the Managed Devices Tree, and it is
now being metered by the Utility Meter.
3.5.2.3 Change VLS Device Configuration Parameters
This task allows you to change VLS device configuration parameters. Follow this procedure to change one
or more VLS device configuration parameters:
1. Start the Utility Meter GUI. For details, see Section 3.1: “Starting the Utility Meter GUI”.
2. In the Utility Meter GUI, click the Devices tab.
3. In the Managed Devices Tree, select the IP address or hostname of the VLS device that you want
to modify.
4. In the Utility Meter GUI Tasks (right) pane, click the Modify Device button.
The Utility Meter GUI displays the Modify Device dialog box.
66 Performing Utility Meter Tasks