8.16 HP Utility Meter User's Guide (June 2010)

Figure 3-10 Add Device Dialog Box for PPU WBEM Partition/Server
4. In the Add Device dialog box's Device Type drop-down list, select the PPU WBEM
Partition/Server item.
5. In the Add Device dialog box, enter values into the following fields:
• Device IP/Hostname – Enter either the IP address or hostname of the PPU WBEM
Partition/Server.
• Device Info – (Optional) Enter a description for the PPU WBEM Partition/Server.
• Login – Enter the username of the PPU WBEM Partition/Server.
• Password – Enter the password of the PPU WBEM Partition/Server.
• Require server certificate – Select Yes (default) if you want to require a server certificate
when the server is accessed or No if you don't want to require a server certificate. See
Section 3.5.1.1: “Add a PPU WBEM Partition/Server” for information about adding the certificate
to the servers.pem file. Note that this should be done before the PPU WBEM Partition/Server
is added to the Utility Meter.
3.5 Utility Meter Devices Tasks 53