8.16 HP Utility Meter User's Guide (June 2010)

• View Device — This task displays information about a PPU WBEM Partition/Server. See Section 3.5.3.
• Remove Device — This task removes a device from the set of devices being metered by the Utility Meter.
See Section 3.5.4.
Figure 3-9 Devices Tab
3.5.1 Configure a Device (Add Device)
The general processes for configuring devices are:
• WBEM Partition/Server: This is a one-step configuration process using the Utility Meter's Add Device
dialog box.
• EVA: This is a one-step configuration process using the Utility Meter's Add Device dialog box. The
EVA CV server name needs to be added to the Utility Meter. The EVA disk array is automatically
configured as a URS Device, which is metered by the Utility Meter.
• XP: This is a one-step configuration process using the Utility Meter's Add Device dialog box. The XP
CV server and the XP disk array's model and serial number need to be added to the Utility Meter. The
XP disk array is automatically configured as a URS Device, which is metered by the Utility Meter.
• VLS: This is a one-step configuration process using the Utility Meter's Add Device dialog box. The
VLS CV server name needs to be added to the Utility Meter. The VLS device is automatically configured
as a URS Device, which is metered by the Utility Meter.
• Cisco SAN Switch: This is a one-step configuration process using the Utility Meter's Add Device dialog
box.
• HP/Brocade SAN Switch: This is a two-step configuration process using the Utility Meter's Add Device
dialog box. The SMI-S Agent needs to be added to the Utility Meter, then the switches maintained by
the SMI-S Agent that are under a URS contract need to be added using the Modify Device dialog
box.
3.5 Utility Meter Devices Tasks 51