8.16 HP Utility Meter User's Guide (June 2010)

B.3 Networking details on the VLS9000 Virtual Tape Libary
URS interfaces to the VLS9000 system through ssh. Please fill out the table below for details on the VLS9000
system. If multiple VLS devices are present, please duplicate this page and complete one table per device.
AnswerQuestion
IP address or hostname of the VLS9000 Virtual Tape Library under
a URS contract
Username/password
1
to access the VLS9000 system with
Administrator privileges
1 For security reasons, this information can be made available at the time of installation only.
B.4 Networking Details on the Cisco SAN Switch
URS interfaces to the CIM server on a Cisco SAN switch. Please fill out the table below for details on it. If
multiple Cisco switches need to be configured for URS that have different CIM server details, please duplicate
this page and complete one table per switch.
AnswerQuestion
IP address or hostname of the Cisco SAN switch under a URS
contract
CIM Server Authentication
Username/password
1
to access the CIM server on the Cisco SAN
switch
Yes / NoDoes the CIM server require a certificate
1
?
1 For security reasons, this information can be made available at the time of installation only.
B.5 Networking Details on the Server Running Brocade’s SMI-S Agent
URS interfaces to the Brocade SMI-S Agent to inventory Brocade SAN switches. Please fill out the table below
for details on it. If multiple SMI-S Agent instances will be in use, please duplicate this page and complete
one table per instance.
AnswerQuestion
IP address or hostname of the server running the Brocade SMI-S
Agent software that is controlling one or more Brocade SAN
switches under a URS contract
SMI-S Agent Authentication
Username/password
1
to access the Brocade SMI-S Agent on the
above server
Yes / NoDoes the SMI-S Agent require a certificate
1
?
1 For security reasons, this information can be made available at the time of installation only.
B.3 Networking details on the VLS9000 Virtual Tape Libary 101