8.16 HP Utility Meter User's Guide (June 2010)

AnswerQuestion
a. Yes / No
b.
c.
d.
If the transport of URS Usage Reports will be through https :
a. TCP port 443 has to be open in the firewall of the customer
for traffic from the Utility Meter to HP. Is this port opened?
If a proxy server is used to relay data over https to the outside
world:
b. hostname and domain name of the proxy server
c. proxy server port number
d. username/password
1
to cross the proxy server
1 For security reasons, this information can be made available at the time of installation only.
NOTE:
The Utility Meter has an iLO2 board built in. Please configure network access to the iLO2 board upfront
and have its username/password available during installation. A configured iLO2 board helps also in
the troubleshooting at a later stage.
1.
2. The configuration of the Utility Meter software requires a browser (MSIE, Firefox) or a graphical console
to complete the configuration of URS.
B.1 Networking Details on the Windows Server Running Command View
EVA
URS needs Command View EVA to inventory EVA arrays. Please fill out the table below for details in it. If
multiple Command View EVA instances will be in use, please duplicate this page and complete one table
per instance.
AnswerQuestion
IP address or hostname of the Windows server running Command
View EVA that is controlling one or more EVA disk arrays under
a URS contract
Username/password
1
for an account on the Command View EVA
instance that belongs to the Windows group called HP Storage
Users
1 For security reasons, this information can be made available at the time of installation only.
NOTE: The SMI-S and the Performance Monitoring services in CV EVA are not needed for URS and should
not be installed.
B.2 Networking Details on the Windows Server Running Command View
XP Advanced Edition or Array Manager Software
URS uses HP StorageWorks Command View XP Advanced Edition (CVAE) or Array Manager to inventory
XP arrays. Please fill out the table below for details on it. If multiple CVAE or Array Manager instances will
be in use, please duplicate this page and complete one table per instance.
AnswerQuestion
IP address or hostname of the Windows server running HP
StorageWorks XP Array Manager or Command View XP Advanced
Edition that is controlling one or more XP disk arrays under a URS
contract
Username/password
1
of an account in the above HP
StorageWorks XP Array Manager or CVAE instance with “Modify”
privileges
Username/password
1
of the Remote Web Console application
controlling the XP array
1 For security reasons, this information can be made available at the time of installation only.
100 Site Preparation Form for Utility Ready Storage