8.14.01 HP Utility Meter User's Guide (June 2009)

Figure 3-27 Diagnose PPU WBEM Partition/Server Results Window
IMPORTANT: If the window's Status field does not have the value ON, then the partition/server is
not connected to the Utility Meter. Ensure that the partition/server is properly configured in the Utility
Meter. For troubleshooting details, see Troubleshooting a WBEM Device.
7. The Send test report button in the Diagnose Device window performs the same test as the
Test Connection button and also tests the connection from the Utility Meter to HP. This test will store
a test usage report in the /var/opt/meter/sent directory after it has been sent to HP (when the
report is waiting to be sent it is stored in /var/opt/meter/out).
If the Utility Meter was able to send the test report to HP, then the Status field contains the message
Sending completed.
NOTE: Users can log into the UPS Web Portal to check that this test report was received (see Test
Connection from PPU Partition to UPS Web Portal).
Figure 3-28 Diagnose PPU WBEM Partition/Server Send Test Report Window
8. In the Diagnose window, click the Done button to close the window.
3.6 Utility Meter Diagnose Tasks 73