8.14.01 HP Utility Meter User's Guide (June 2009)

• For PPU installations:
/usr/sbin/swinstall -s <path-to-depot> T2805AA \*
• For URS installations:
/usr/sbin/swinstall -s <path-to-depot> T5462A \*
8. Follow the instructions in Completing the Utility Meter Software Installation to complete and verify the
Utility Meter software installation has been successful.
2.5.2 Installing the Utility Meter Software from the Software Media (CD or DVD)
Follow this procedure to install the Utility Meter software from the appropriate (HP-UX 11i v2, or 11i v3)
HP-UX Application Software media (CD or DVD):
1. On the Utility Meter, log in as root.
2. Insert the HP-UX Application Software media into the optical drive (CD or DVD) on the Utility Meter
system. Alternatively, the HP-UX Application Software media may be loaded into a drive on another
system running HP-UX, or a copy of the HP-UX Application Software media may be on another system,
running HP-UX.
3. If using the locally attached drive, do the following to install the Utility Meter software from the media;
otherwise, go to Step 4:
a. Start the swinstall GUI by executing the following command:
# /usr/sbin/swinstall
This command starts either:
• The swinstall Graphical User Interface (GUI) — on a system with an X11 graphical display
• The swinstall Terminal User Interface (TUI) — on a system without an X11 graphical
display (for example, the Utility Meter console)
NOTE: The swinstall command automatically mounts the optical drive if it is not already
mounted.
b. Close any swinstall error windows.
c. In the Specify Source window, click the Find Local CD button.
d. In the SD Install window, mark the Utility Meter software (T2805AA or T5462A) bundle for
installation and install the bundle.
e. After the Utility Meter software installation is complete, close the swinstall GUI (or TUI).
You are finished with the Utility Meter software installation and can skip Step 4.
4. If using a software depot on a remote system, do the following:
a. Determine the hostname of the system containing the software depot.
b. Determine the pathname of the software depot on the above system.
c. Using the above information, install the Utility Meter software with the following swinstall
command:
# /usr/sbin/swinstall –s hostname:pathname T2805AA \*
Where hostname is determined in Step 4a and pathname is determined in Step 4b.
After installing the Utility Meter software, follow the instructions in Completing the Utility Meter Software
Installation to complete and verify the Utility Meter software installation has been successful.
2.5.3 Completing the Utility Meter Software Installation
After you have installed the Utility Meter software, perform the following steps to complete the software
installation:
2.5 Installing the Utility Meter Software 29