HP P6000 Continuous Access Implementation Guide (T3680-96431, August 2012)

IMPORTANT: This reduced availability configuration is not recommended for production
environments requiring high availability. The single switch on each site represents an SPOF for the
host I/O and the HP P6000 Continuous Access replication traffic.
• Single-fabric components—Figure 30 (page 73) shows the various components that comprise
the single-fabric topology.
• Host I/O zones—Figure 31 (page 74) and Figure 32 (page 75) show the ports used to create
the host I/O zones.
• HP P6000 Command View management zones—Figure 33 (page 76) and Figure 34 (page
77) show the ports used to create the HP P6000 Command View management zones.
• Replication zone—Figure 35 (page 78) shows the ports used to create the HP P6000 Continuous
Access replication zone. Figure 36 (page 79) and Figure 37 (page 80) show replication
zones when array system fan-out is used.
72 Implementing remote replication