HPOS 3.5 SAPConnect

2 HP Output Server

SAPConnect

Configuring HP SAPconnect Server

You can use these attributes with the HP Output Server config_server command to configure an HP

SAPconnect server:

config_server -x "-sapcon-server-sid

RFC Destination -sapcon-logical-fax-dest

fax1" -t sapcon

For information about the config_server command and a complete listing of HP Output Server attributes, refer

to the System Administrator’s Reference for HP Output Server.

The second part of the configuration process involves the following:

1. Testing the connection

The SAPconnect node connection should be tested to ensure that all steps were successfully executed and the

connection is operable.

2. Creating a test fax request

Fax documents can be created and delivered through SAPconnect.

Modifying the saprfc.ini file

You must create an saprfc.ini file and either place it in the HP Output Management for SAP working directory

($DAZEL_HOME/var/sap) or set the RFC_INI environment variable to point to the file, as shown in the examples

below.

On UNIX (Korn shell):

export RFC_INI=/home/myhome/secret/saprfc.ini

On Windows NT from the command prompt:

set RFC_INI=c:\home\myhome\secret\saprfc.ini

NOTE: The steps above are not necessary if the saprfc.ini file is copied to the

$DAZEL_HOME/var/sap directory.

The template dazelInstall/lib/saprfc.ini is provided as part of HP Output Management for SAP. The file

includes a protected R/3 user name and password—HP recommends setting the file mode to read-only for the server’s

process owner.

NOTE: Dazel HSI and HP SAPconnect Server can share the same saprfc.ini file.

-sapcon-client-logon-retry-fa

ctor

Optional: This attribute sets the

SAPCON RFC client logon retry

factor (in seconds).

-sapcon-client-logon-retry-ma

Optional: This attribute sets the

SAPCON RFC client maximum

logon retry interval (in seconds).

Attributes Description