HP OpenView Storage Management Appliance V2.0 Software User Guide (AA-RS0AC-TE, December 2002)

Monitoring Events
64 Storage Management Appliance Software V2.0 User Guide
Figure 46: Event Log Properties page
The system displays the existing log size in megabytes as read-only
information. You can change the maximum log size by selecting a value using
the up and down arrows or typing a value directly in the field provided.
Note: Any change in maximum log size becomes effective only after you clear the log.
The Management Appliance generates the following Event Log events as the
two logs approach the maximum size.
— 880A02BD - Warning - Event Log is 80% full
— 880A02BF - Warning - Audit Log is 80% full
The Management Appliance generates the following Application log events
when the logs reach maximum size.
— 880A02BE - Critical - Event Log is full
— 880A02C0 - Critical - Audit Log is full
Select one of the following options to specify how the system handles new
entries when the log reaches the maximum size.
— Overwrite . . . —The system overwrites existing log entries and no new
entries are lost.