HP Data Protector A.06.00 additional writers and HP StorageWorks Disk Array XP support for Microsoft Volume Shadow Copy Service integration

Restore
With Microsoft Exchange Server 2007 writer, you can restore your data not only to
the original location (from which the backup was performed) but also to a different
location. You can restore:
• A whole storage group
• A single store
In both cases the respective LCR or CCR copies can also be restored.
You can restore data to:
• The original storage group
• A different storage group
• A non-Exchange location – With this restore method, after the restore is completed,
the Recovery Storage Group (RSG) can be created automatically.
• A recovery server – This restore method restores data to different client and
different storage group.
If you restore to a different storage group, you can access single mailboxes or
individual e-mail messages at a different location without changing the original
storage group content. Furthermore, if the whole server is destroyed, restoring to a
different Exchange Server system (recovery server) will minimize the time window
during which your mailboxes will be unavailable.
Prerequisites and limitations
This is a list of prerequisites and limitations for the Data Protector Microsoft Volume
Shadow Copy Service integration. Additional limitations and recommendations that
are not directly connected to the integration (such as operating system and GUI
limitations) and disk array limitations are listed in the HP OpenView Storage Data
Protector Product Announcements, Software Notes, and References.
Prerequisites
Common prerequisites
• Before you begin, ensure that you have correctly installed and configured Data
Protector, writers and providers. Refer to the:
Integrating the Data Protector ZDB integrations and Microsoft Volume Shadow Copy Service72