HP Data Protector A.06.00 additional writers and HP StorageWorks Disk Array XP support for Microsoft Volume Shadow Copy Service integration

During restore to original location, all stores in the storage group are dismounted,
even if only one store from the storage group will be restored. After restore, the stores
are left dismounted.
Table 3 Restore to a different location options
DescriptionOption
With this option selected, Exchange Server replays the restored logs from
the original storage group on the target storage group to bring the restored
database up to date.
If you perform restore to a different store, you can access single mailboxes
or individual e-mail messages on the alternate location without compromising
availability of the original storage group with a potentially unsuccessful
restore operation.
To select this option, select the target stores for each store to be restored
(original stores). First, select the target system from the Target server name
drop-down list, and then choose the desired pairs of stores by selecting
entries in the Original and Target drop-down lists. Note that only stores
cannot be restored, so logs are automatically selected in the restore session
to different location.
This option is selected by default.
Restore
to a
different
store
Select this option to restore your data to a non-Exchange location. In this
case, the restored data will not be managed by Exchange Server and
Recovery Storage Group (RSG) will not be created. You can manually create
RSG after the restore session completes.
On Data Protector session level, this option is already available if you use
Restore into the following directory option. On a storage group level,
however, a storage group can be restored to a target directory, and another
one to a different storage group in the same session if the target client system
is the same. Individual stores can also be restored to a non-Exchange
location. During the restore, data is restored into target component
destination path.
To select this option, first select the target system from the Target server
name drop-down list and then choose the desired stores using the Original
drop-down list.
Restore
to a
non-Exchange
location
Select this option to restore your data to a non-Exchange location. After
restore, Data Protector will create Recovery Storage Group called DP RSG
on the target server. The selected stores and logs will be restored to this
recovery group.
To select this option, first select the target system from the Target server
name drop-down list and then choose the desired stores using the Original
drop-down list.
Restore
to a
non-Exchange
location
and
create
RSG
HP Data Protector A.06.00 additional writers and HP StorageWorks Disk Array XP
support for Microsoft Volume Shadow Copy Service integration 51