HP Data Protector A.06.00 additional writers and HP StorageWorks Disk Array XP support for Microsoft Volume Shadow Copy Service integration

The following restore scenarios are supported:
• Restore of a storage group or individual stores to the original location.
• Restore of LCR and CCR copies (storage groups or individual stores) to the location
where the original database resides.
• Restore of a storage group or individual stores and LCR and CCR copies (storage
groups or individual stores) to a different location. For available options, see
Table 7 on page 115.
• Restore to Recovery Server
If the Exchange Server system is unusable, an entire storage group can be restored
to another Exchange Server system (Recovery Server) and some other storage
group. If the target system is identical to original (the same host name, storage
group names, store names, and the same directory structure), restore can be
started as normal restore to original location. In case of differences, restore to a
different location must be used.
You can restore different storage groups to original and different location in the same
restore session if the target restore client system is the same for all storage groups
involved.
During restore to original location, all stores in the storage group are dismounted,
even if only one store from the storage group will be restored. After restore, the stores
are left dismounted.
Table 7 Restore to a different location options
DescriptionOption
With this option selected, Exchange Server replays the restored logs from
the original storage group on the target storage group to bring the restored
database up to date.
If you perform restore to a different store, you can access single mailboxes
or individual e-mail messages on the alternate location without compromising
availability of the original storage group with a potentially unsuccessful
restore operation.
To select this option, select the target stores for each store to be restored
(original stores). First, select the target system from the Target server name
drop-down list, and then choose the desired pairs of stores by selecting
entries in the Original and Target drop-down lists. Note that only stores
cannot be restored, so logs are automatically selected in the restore session
to different location.
This option is selected by default.
Restore
to a
different
store
HP Data Protector A.06.00 additional writers and HP StorageWorks Disk Array XP
support for Microsoft Volume Shadow Copy Service integration 115