FW 07.00.00/HAFM SW 08.06.00 McDATA Products in a SAN Environment Planning Manual (620-000124-500, April 2005)

Physical Planning Considerations

5-13

Physical Planning Considerations

Figure 5-3 Typical Network Configuration (Two Ethernet Connections)

If only one management server connection is used and this

connection is provided through the customer intranet, all functions

provided by the server are available to users throughout the

enterprise. The purpose for dual LAN connections is to provide a

dedicated LAN segment that isolates the server and managed

products from other users in the enterprise.

NOTE: Both Ethernet adapters in the management server provide auto-

detecting 10/100 Mbps connections. The dedicated LAN segment that

connects the server to managed products and the optional customer

intranet operate at either ten or 100 Mbps.

SNMP Management

Workstations

An SNMP agent that runs on the management server can be

configured through the SAN management application. This agent

implements Version 3.1 of the Fibre Alliance management

information base (MIB) as follows: