FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manual (620-000131-620, April 2005)

F
FCFE.MIB
F-45
Fabric Element Management MIB
Description This object identifies the FxPort within the module. This number
ranges from 1 to the value of fcFeModulePortCapacity for the
associated module. The value remains constant for the identified
FxPort until the module is re-initialized.
Sequence
::= { fcFxPortC3AcctEntry 2 }
fcFxPortC3InFrames
SYNTAX Counter
Access read-only
Status mandatory
Description The number of Class 3 frames received by this FxPort from its
attached NxPort.
Sequence
::= { fcFxPortC3AcctEntry 3 }
fcFxPortC3OutFrames
SYNTAX Counter
Access read-only
Status mandatory
Description The number of Class 3 frames delivered through this FxPort to its
attached NxPort.
Sequence
::= { fcFxPortC3AcctEntry 4 }
fcFxPortC3InOctets
SYNTAX Counter
Access read-only
Status mandatory
Description The number of Class 3 frame octets, including the frame delimiters,
received by this FxPort from its attached NxPort.
Sequence
::= { fcFxPortC3AcctEntry 5 }