OS SNMP Support Manual (620-000131-620, April 2005)

FCFE.MIB

F-29

Fabric Element Management MIB

Description A variable indicating whether the FxPort has agreed to support Class

2 sequential delivery from the Fabric Login. This is only meaningful

if Class 2 service has been agreed.

Sequence

::= { fcFxlogiEntry 10 }

fcFxPortClass3SeqDelivAgreed

Syntax INTEGER { yes (1), no (2) }

Access read-only

Status mandatory

Description A flag indicating whether the FxPort has agreed to support Class 3

sequential delivery from the Fabric Login. This is only meaningful if

Class 3 service has been agreed.

Sequence

::= { fcFxlogiEntry 11 }

fcFxPortNxPortName

Syntax FcPortName

Access read-only

Status mandatory

Description The port name of the attached NxPort, if applicable. If the value of

this object is '0000000000000000'H, this FxPort has no NxPort

attached to it.

Sequence

::= { fcFxlogiEntry 12 }

fcFxPortConnectedNxPort

Syntax FcAddressId

Access read-only

Status mandatory

Description The address identifier of the destination FxPort with which this

FxPort is currently engaged in a either a Class 1 or loop connection. If

the value of this object is '000000'H, this FxPort is not engaged in a

connection.

Sequence

::= { fcFxlogiEntry 13 }