OS SNMP Support Manual (620-000131-620, April 2005)

F-24

E/OS SNMP Support Manual

Fabric Element Management MIB

Status mandatory

Description The current operational status of the FxPort. The testing(3) indicates

that no operational frames can be passed. If

fcFxPortPhysAdminStatus is offline(2) then fcFxPortPhysOperStatus

should be offline(2). If fcFxPortPhysAdminStatus is changed to

online(1) then fcFxPortPhysOperStatus should change to online(1) if

the FxPort is ready to accept Fabric Login request from the attached

NxPort; it should proceed and remain in the link-failure(4) state if

and only if there is a fault that prevents it from going to the online(1)

state.

Sequence

::= { fcFxPortPhysEntry 4 }

fcFxPortPhysLastChange

Syntax TimeTicks

Access read-only

Status mandatory

Description The value of sysUpTime at the time the FxPort entered its current

operational status. A value of zero indicates that the FxPort's

operational status has not changed since the agent last restarted.

Sequence

::= { fcFxPortPhysEntry 5 }

fcFxPortPhysRttov

Syntax MilliSeconds

Access read-only -- instead of read-write

Status mandatory

Description The Receiver_Transmitter_Timeout value of the FxPort. This is used

by the receiver logic to detect Loss of Synchronization.

Sequence

::= { fcFxPortPhysEntry 6 }