OS SNMP Support Manual (620-000131-620, April 2005)

B-58

E/OS SNMP Support Manual

FC Management MIB

connUnitPortStatCountClass1PBSYFrames

Syntax OCTET STRING (SIZE (8))

Access read-only

Status mandatory

Description Count of times that PBSY was returned to this port as a result of a

Class 1 Frame that could not be delivered to the other end of the link.

This occurs if the destination N_Port is temporarily busy. PBSY can

only occur on SOFc1 frames (the frames that establish a connection).

Note, this is a Fibre Channel only stat.

Sequence

::= { connUnitPortStatEntry 17 }

connUnitPortStatCountClass1FRJTFrames

Syntax OCTET STRING (SIZE (8))

Access read-only

Status mandatory

Description Count of times that FRJT was returned to this port as a result of a

Class 1 Frame that was rejected by the fabric. Note, this is a Fibre

Channel only stat.

Sequence

::= { connUnitPortStatEntry 18 }

connUnitPortStatCountClass1PRJTFrames

Syntax OCTET STRING (SIZE (8))

Access read-only

Status mandatory

Description Count of times that FRJT was returned to this port as a result of a

Class 1 Frame that was rejected at the destination N_Port. Note, this

is a Fibre Channel only stat.

Sequence

::= { connUnitPortStatEntry 19 }

connUnitPortStatCountClass2RxFrames

Syntax OCTET STRING (SIZE (8))

Access read-only