OS SNMP Support Manual (620-000131-620, April 2005)

B-30

E/OS SNMP Support Manual

FC Management MIB

smallFormFactor(9) -- this is generically a small form factor

connector.

}

Access read-only

Status mandatory

Description The module type of the port connector.

Sequence

::= { connUnitPortEntry 9 }

connUnitPortWwn

Syntax FcNameId

Access read-only

Status mandatory

Description The World Wide Name of the port if applicable, otherwise all zeros.

Sequence

::= { connUnitPortEntry 10 }

connUnitPortFCId

Syntax FcAddressId

Access read-only

Status mandatory

Description This is the assigned Fibre Channel ID of this port. This value is

expected to be a Big Endian value of 24 bits. If this is loop, then it is

the ALPA that is connected.

If this is an eport, then it will only contain the domain ID left justified,

zero filled. If this port does not have a Fibre Channel address, return

all bits set to 1.

Sequence

::= { connUnitPortEntry 11 }

connUnitPortSn

Syntax DisplayString (SIZE(0..79))

Access read-only

Status mandatory