OS SNMP Support Manual (620-000131-620, April 2005)

2-6

E/OS SNMP Support Manual

McDATA SNMP Support

* EOS 6.0 and later only.

The following sections describe each trap and the variables within the

traps. For each variable, the OID is expressed as a numeric value first

followed by a second line showing the symbolic object name.

Appended to the right of the OIDs are the index values for each

object. Most of the objects within traps are actually table values. (That

is, they refer to a MIB object which is part of a table defined in the

MIB). Each SNMP table value must have an index appended to

identify a specific table row.

For example, the enterprise specific port status change trap has the

variable binding for fcEosPortOpStatus, which is a table entry value.

So the OID for fcEosPortOpStatus (1.3.6.1.4.1.289.2.1.1.2.3.1.1.3)

specifies a table column – to get a value for a specific port the table

index (port_number+1) must be appended to the OID. If the trap

occurred because of a change on port 5, then the actual variable OID

would be 1.3.6.1.4.1.289.2.1.1.2.3.1.1.3.6.

Switch SCN Alert Change in switch

status.

FC-MGMNT 1.3.6.1.2.1.8888.0.1 YES YES

Switch Deletion Alert A switch is removed

from management

control.

FC-MGMNT 1.3.6.1.2.1.8888.0.2 NO YES

Event SCN Info A new system event

was generated.

FC-MGMNT 1.3.6.1.2.1.8888.0.3 YES YES

Sensor SCN Alert Change in status for

FAN/FAN2/POWER

FRUs.

FC-MGMNT 1.3.6.1.2.1.8888.0.4 YES YES

Port SCN Alert A change in port

status.

FC-MGMNT 1.3.6.1.2.1.8888.0.5 YES YES

Trap Severity Sent because MIB Trap OID E/OS EFCM