OS SNMP Support Manual (620-000131-620, April 2005)

A-26

E/OS SNMP Support Manual

Fibre Alliance MIB

Description The port type refers to the protocol active on the port and can take

one of the following values:

Sequence

::= { fcConnUnitPortEntry 2 }

fcConnUnitPortFCClassCap

Syntax FcPortFCClass

Max-Access read-only

Status current

Description Bit mask that specifies the classes of service capability of this port. If

this object is not applicable, the agent MUST return all bits set to zero.

Sequence

::= { fcConnUnitPortEntry 3 }

fcConnUnitPortFCClassOp

Syntax FcPortFCClass

Max-Access read-only

Status current

unknown (1) cannot be determined

other (2) none of the following:

notPresent (3) no port

hubPort (4) hub port

nPort (5) end port for fabric

lPort (6) end port for loop

flPort (7) public loop

fPort (8) fabric port

ePort (9) fabric expansion port

gPort (10) generic fabric port

domainController (11) domain controller

hubController (12) hub controller

scsi (13) parallel SCSI port

escon (14) escon port

lan (15) LAN port

wan (16) WAN port"