OS SNMP Support Manual (620-000131-620, April 2005)

2-138

E/OS SNMP Support Manual

McDATA SNMP Support

Description Number of frames received with invalid CRC. This count is part of

the Link Error Status Block (LESB). (FC-PH 29.8). Loop ports should

not count CRC errors passing through when monitoring.

NOTE: This is a Fibre Channel only statistic.

FcConnUnitPortStatCountInvalidTxWords

Type Counter64

Product Mapping stInvalidTxWords (Only supports low 32 bits of counter, high 32 bits

are set to zero).

Access R

Description Number of invalid transmission words received at this port. This

count is part of the Link Error Status Block (LESB). (FC-PH 29.8).

NOTE: This is a Fibre Channel only statistic.

FcConnUnitPortStatCountPrimitiveSequenceProtocolErrors

Type Counter64

Product Mapping stPrimSeqProtoErrors (Only supports low 32 bits of counter, high 32

bits are set to zero).

Access R

Description Number of primitive sequence protocol errors detected at this port.

This count is part of the Link Error Status Block (LESB). (FC-PH 29.8).

NOTE: This is a Fibre Channel only statistic.

FcConnUnitPortStatCountLossofSignal

Type Counter64

Product Mapping stSigLosses (Only supports low 32 bits of counter, high 32 bits are set

to zero).

Access R

Description Number of instances of signal loss detected at port. This count is part

of the Link Error Status Block (LESB). (FC-PH 29.8).