OS SNMP Support Manual (620-000131-620, April 2005)

Fibre Alliance MIB

2-133

McDATA SNMP Support

NOTE: This is a Fibre Channel only statistic.

FcConnUnitPortStatCountClass2PBSYFrames

Type Counter64

Product Mapping Not supported.

Access R

Description Number of times that PBSY was returned to this port as a result of a

Class 2 Frame that could not be delivered to the other end of the link.

This occurs if the destination N_Port is temporarily busy. PBSY can

only occur on SOFc1 frames (the frames that establish a connection).

NOTE: This is a Fibre Channel only statistic.

FcConnUnitPortStatCountClass2FRJTFrames

Type Counter64

Product Mapping stC2FabricReject (Only supports low 32 bits of counter, high 32 bits

are set to zero).

Access R

Description Number of times that FRJT was returned to this port as a result of a

Class 2 Frame that was rejected by the fabric.

NOTE: This is a Fibre Channel only statistic.

FcConnUnitPortStatCountClass2PRJTFrames

Type Counter64

Product Mapping Not supported.

Access R

Description Number of times that FRJT was returned to this port as a result of a

Class 2 Frame that was rejected at the destination N_Port.

NOTE: This is a Fibre Channel only statistic.