OS SNMP Support Manual (620-000131-620, April 2005)

2-126

E/OS SNMP Support Manual

McDATA SNMP Support

Product Mapping For F ports, return Fibre Channel Address. For E_Ports, return left

adjusted domainId of the switch.

Access R

Description This is the Fibre Channel ID of this port. If the connectivity unit is a

switch, this is expected to be a 24-bit Big Endian value. If this is loop,

then it is the ALPA that is connected. If this is an E_Port, then it will

only contain the domain ID. If not any of those, unknown or cascaded

loop, return all bits set to 1.

fcConnUnitPortStatTable - Port statistics

There is one and only one statistics table for each individual port. For

all objects in statistics table, if the object is not supported by the conn

unit then the high order bit is set to 1 with all other bits set to zero.

The high order bit is reserved to indicate if the object if supported or

not. All objects start at a value of zero at hardware initialization and

continue incrementing till end of 63 bits and then wrap to zero.

*fcConnUnitPortStatIndex

Type Unsigned32

Product Mapping A port number, starting from 1 to maximum number of ports.

Access R

Description A unique value among all entries in this table, between 0 and

fcConnUnitNumPort[fcConnUnitPortUnitId].

fcConnUnitPortStatCountError

Type Counter64

Product Mapping This MIB object counts:

address ID errors,

CRC errors, delimiter errors,

frames too short,

invalid transmission words,

link failures,

primitive sequence errors,

signal losses,