FW 05.01.00 and SW 07.01.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches (AA-RQ7AD-TE, June 2003)

Error Messages
242 CLI Reference Guide for Directors and Edge Switches
Error 243: Not allowed
while S/390 Mode is
Enabled
This operation is not
allowed while S/390
mode (FICON
management style in
HAFM) is enabled.
This command is not valid
for the S/390
environment (FICON
management style in
HAFM).
Error 244: Not allowed
while Enterprise Fabric
Mode is Active and
Switch is Online
This operation is not
allowed while the switch
is in Enterprise Fabric
mode and the switch is
online.
Make sure Enterprise
Fabric mode is not
enabled and the switch is
offline.
Error 245: Invalid
increment value
The increment value
specified is not between 1
and 70560.
Make sure the increment
value given is between 1
and 70560.
Error 246: Invalid interval
value
The interval value
specified is not between 5
and 70560 minutes.
Make sure the increment
value given is between 5
and 70560 minutes.
Error 247: Invalid counter
number
The counter specified is
not a valid number.
Use the table shown by
the command
perf.counterThresh
Alerts.showStatist
icsTable to find a valid
counter value.
Error 248: A counter must
be assigned to this
threshold alert
A counter must be
assigned to an alert
before it is enabled.
Use the
perf.counterThresh
Alerts.setCounter
command to set a counter
before the alert is
enabled.
Error 249: At least one
port or port type must be
added to this threshold
alert
A port or port type must
be assigned to an alert
before it is enabled.
Use the
perf.counterThresh
Alerts.addPort
command to add a port
before the alert is
enabled.
Error 250: Invalid counter
threshold alert name.
The name specified for
the alert is not valid.
A counter threshold alert
with the specified name
does not exist.
Table 5: CLI Error Messages (Continued)
Message Description Action