FW 05.01.00 and SW 07.01.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches (AA-RQ7AD-TE, June 2003)

perf.openTrunking.backPressure
151CLI Reference Guide for Directors and Edge Switches
Syntax
backPressure backPressureState
Purpose
This command configures the Back Pressure state of the OpenTrunking
configuration.
Parameters
This command has one parameter:
Command Example
Root> perf openTrunking backPressure 1
perf.openTrunking.backPressure
backPressureState This parameter can be set to enable or
disable OpenTrunking back pressure.
Boolean 1 and 0 values may also be
substituted. If the state is configured to be
enabled, a back pressure entry is made to the
Event Log and an SNMP trap is generated if
SNMP is configured.