FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manual (620-000131-620, April 2005)

C
FCEOS.MIB
C-49
McDATA Private Enterprise MIB
Status mandatory
Description The current state of the threshold.
Sequence
::= { fcEosTAEntry 3 }
fcEosTAType
Syntax INTEGER { throughput (1), counter (2) }
Access read-only
Status mandatory
Description The type of the threshold.
Sequence
::= { fcEosTAEntry 4 }
fcEosTAPortType
Syntax INTEGER { list (1), ePorts (2), fPorts (3), flPorts (4) }
Access read-only
Status mandatory
Description A threshold can be set on a list of physical port numbers or on all the
ports of the specified type (ePorts, fPorts).
Sequence
::= { fcEosTAEntry 5 }
fcEosTAPortList
Syntax FcEosPortList
Access read-only
Status mandatory
Description A bit map that identifies which ports this threhold alert applies to
(only valid if the Threshold Alert Port Type = list). The left most bit
represents the port 0.
Sequence
::= { fcEosTAEntry 6 }
fcEosTAInterval
Syntax INTEGER
Access read-only