OS SNMP Support Manual (620-000131-620, April 2005)

B-66

E/OS SNMP Support Manual

FC Management MIB

connUnitPortStatCountFramesTooLong

Syntax OCTET STRING (SIZE (8))

Access read-only

Status mandatory

Description Count of frames received at this port where the frame length was

greater than what was agreed to in FLOGI/PLOGI. This could be

caused by losing the end of frame delimiter. Note, this is a Fibre

Channel only stat.

Sequence

::= { connUnitPortStatEntry 46 }

connUnitPortStatCountFramesTruncated

Syntax OCTET STRING (SIZE (8))

Access read-only

Status mandatory

Description Count of frames received at this port where the frame length was less

than the minimum indicated by the frame header - normally 24 bytes,

but it could be more if the DFCTL field indicates an optional header

should have been present. Note, this is a FC only stat.

Sequence

::= { connUnitPortStatEntry 47 }

connUnitPortStatCountAddressErrors

Syntax OCTET STRING (SIZE (8))

Access read-only

Status mandatory

Description Count of frames received with unknown addressing. e.x. unknown

SID or DID. the SID or DID is not known to the routing algorithm.

Note. this is a FC only stat.

Sequence

::= { connUnitPortStatEntry 48 }

connUnitPortStatCountDelimiterErrors

Syntax OCTET STRING (SIZE (8))

Access read-only