OS SNMP Support Manual (620-000131-620, April 2005)

B-46

E/OS SNMP Support Manual

FC Management MIB

Description The port number on the unit specified by connUnitLinkNodeIdY if

known, otherwise -1. If the value is nonnegative then it will be equal

to connUnitPortPhysicalNumber.

Sequence

::= { connUnitLinkEntry 7 }

connUnitLinkPortWwnY

Syntax FcGlobalId

Access read-only

Status mandatory

Description The port WWN on the unit specified by connUnitLinkNodeIdY if

known, otherwise 16 octets of binary 0.

Sequence

::= { connUnitLinkEntry 8 }

connUnitLinkAgentAddressY

Syntax OCTET STRING (SIZE(16))

Access read-only

Status mandatory

Description The address of an FCMGMT MIB agent for the node identified by

connUnitLinkNodeIdY, if known; otherwise 16 octets of binary 0.

Sequence

::= { connUnitLinkEntry 9 }

connUnitLinkAgentAddressTypeY

Syntax INTEGER

Access read-only

Status mandatory

Description If connUnitLinkAgentAddressY is nonzero, it is a protocol address.

ConnUnitLinkAgentAddressTypeY is the 'address family number'

assigned by IANA to identify the address format. (e.g., 1 is Ipv4, 2 is

Ipv6). If connUnitLinkAgentAddressY is all zeros, then this value is

ignored.

Sequence

::= { connUnitLinkEntry 10 }