OS SNMP Support Manual (620-000131-620, April 2005)

B-12

E/OS SNMP Support Manual

FC Management MIB

Status mandatory

Description The serial number for this connectivity unit.

Sequence

::= { connUnitEntry 8 }

connUnitUpTime

Syntax TimeTicks

Access read-only

Status mandatory

Description The number of centiseconds since the last unit initialization.

Sequence ::= { connUnitEntry 9 }

connUnitUrl

Syntax DisplayString

Access read-write

Status mandatory

Description URL to launch a management application, if applicable. Otherwise

empty string. In a standalone unit, this would be the same as the

top-level URL. This has the same definition as systemURL for

keywords. If write is not supported, then return invalid. This value

will be retained across boots.

Sequence

::= { connUnitEntry 10 }

connUnitDomainId

Syntax OCTET STRING (SIZE(3))

Access read-only

Status mandatory

Description 24 bit Fibre Channel address ID of this connectivity unit, right

justified with leading zero's if required. This should be set to the

Fibre Channel address ID or if it is a switch it would be set to the

Domain Controller address. If this value is not applicable, return all

bits set to one.

Sequence

::= { connUnitEntry 11 }