OS SNMP Support Manual (620-000131-620, April 2005)

A-50

E/OS SNMP Support Manual

Fibre Alliance MIB

Description Count of Class 1 Frames transmitted out this port. Note, this is a Fibre

Channel only stat.

Sequence

::= { fcConnUnitPortStatEntry 14 }

fcConnUnitPortStatC1FBSYFrames

Syntax Counter64

Max-Access read-only

Status current

Description Count of times that FBSY was returned to this port as a result of a

Class 1 Frame that could not be delivered to the other end of the link.

This occurs if either the Fabric or the destination port is temporarily

busy. FBSY can only occur on SOFc1 frames (the frames that

establish a connection). Note, this is a Fibre Channel only stat.

Sequence

::= { fcConnUnitPortStatEntry 15 }

fcConnUnitPortStatC1PBSYFrames

Syntax Counter64

Max-Access read-only

Status current

Description Count of times that PBSY was returned to this port as a result of a

Class 1 Frame that could not be delivered to the other end of the link.

This occurs if the destination N_Port is temporarily busy. PBSY can

only occur on SOFc1 frames (the frames that establish a connection).

Note, this is a Fibre Channel only stat.

Sequence

::= { fcConnUnitPortStatEntry 16 }

fcConnUnitPortStatC1FRJTFrames

Syntax Counter64

Max-Access read-only

Status current

Description Count of times that FRJT was returned to this port as a result of a

Class 1 Frame that was rejected by the fabric. Note, this is a Fibre

Channel only stat.