OS SNMP Support Manual (620-000131-620, April 2005)

A-34

E/OS SNMP Support Manual

Fibre Alliance MIB

fcConnUnitPortNodeWwn

Syntax FcNameId

Max-Access read-only

Status current

Description The Node World Wide Name of the port if applicable, otherwise all

zeros. This should have the same value for a group of related ports.

The container is defined as the largest physical entity. For example,

all ports on HBAs on a host will have the same Node WWN. All ports

on the same storage subsystem will have the ame Node WWN.

Sequence

::= { fcConnUnitPortEntry 20 }

fcConnUnitPortHWState

Syntax INTEGER {

Max-Access read-only

Status current

Description The hardware detected state of the port.

Sequence

::= { fcConnUnitPortEntry 21 }

Event group

fcConnUnitEventTable

Syntax SEQUENCE OF FcConnUnitEventEntry

Max-Access not-accessible

unknown (1),

failed (2), port failed diagnostics

bypassed (3), FCAL bypass, loop only

active (4), connected to a device

loopback (5), Port in ext loopback

txfault (6), Transmitter fault

noMedia (7), media not installed

linkDown (8) waiting for activity (rx sync) }