FW 05.01.00 and SW 07.01.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches (AA-RQ7AD-TE, June 2003)

config.security.fabricBinding.setState
67CLI Reference Guide for Directors and Edge Switches
Syntax
setState fabricBindingState
Purpose
This command sets the fabric binding state for the pending fabric binding
configuration work area.
Note: This state is not saved to the fabric until the activatePending command is
issued.
Parameters
This command has one parameter:
config.security.fabricBinding.setState
fabricBindingState Specifies the fabric binding state for the
pending fabric binding configuration work
area. Valid values are:
inactive — Deactivates fabric binding.
Switches and directors are allowed to join
the fabric without restriction. The Fabric
Membership List is empty in this state, and
as such, the Fabric Membership List is
cleared when this state is requested.
restrict — Activates fabric binding and
restricts connections. Only switches
identified in the Fabric Membership List
may join the fabric in this state. The Fabric
Membership List is automatically populated
with devices attached prior to activation, but
all new members must be manually added
before connecting. The switch must be
online to complete this request. You can
substitute the following Boolean values: 0
for inactive and 1 for restrict.