FW 05.01.00 and SW 07.01.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches (AA-RQ7AD-TE, June 2003)

Error Messages
229CLI Reference Guide for Directors and Edge Switches
Error 91: E_Port Type
Configured
Ports cannot be
configured as E_Ports in
S/390 mode (FICON
management style in
HAFM).
Reconfigure the port as
either an F_Port or a
G_Port, and then resubmit
the command.
Error 92: Not Allowed
While Port Is Unblocked
The port must be blocked
to complete this request.
Block the port, and then
resubmit the command.
Error 93: Not Allowed
While FICON MS Is
Installed
This request cannot be
completed because
FICON Management
Server is installed.
This action is not
supported. No action
necessary.
Error 94: Invalid Feature
Combination
The requested features
cannot be installed at the
same time on one director
or edge switch.
Contact your sales
representative.
Error 99: Preferred
Domain ID Cannot Be
Zero
This switch cannot be
configured to have a
preferred domain ID
equal to zero (0).
Enter an integer in the
range 1–31 for the
preferred domain ID.
Error 101: Command Not
Supported on This
Product
This product does not
support the specified
command.
Information only
message: this operation is
not supported.
Error 102: Switch Not
Operational
The request cannot be
completed because the
switch is not operational.
Refer to the product
service manual, and
consult your service
representative.
Error 115: Invalid Switch
Speed
The request cannot be
completed because the
switch is not capable of
operating at the
configured speed.
Refer to the product
service manual to
determine the speed
capabilities of the
product.
Error 116: Switch Not
Capable of 2 Gbps
The request cannot be
completed because the
switch is not capable of
operating at 2.125
gigabits per second
(Gbps).
Refer to the product
service manual to
determine the speed
capabilities of the
product.
Table 5: CLI Error Messages (Continued)
Message Description Action