FW 05.01.00 and SW 07.01.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches (AA-RQ7AD-TE, June 2003)

perf.thresholdAlerts.counter.removePort
165CLI Reference Guide for Directors and Edge Switches
Syntax
removePort name portNumber
Purpose
This command removes a port from the specified counter threshold alert.
Note: An alert cannot be modified unless it is in the disabled state.
Parameters
This command has the following parameters.
Command Example
Root> perf thresholdAlerts counter removePort checklinks 12
perf.thresholdAlerts.counter.removePort
name The name of a counter threshold alert as
defined by the command
perf.thresholdAlerts.counter.addAlert,
described on page 161.
portNumber Specifies the port number. Valid values are:
0–15 for the Edge Switch 2/16
0-23 for the Edge Switch 2/24
0–31 for the Edge Switch 2/32
0–63 for the Director 2/64
0–127 and 132–143 for the Director 2/140
all applies the congestionThreshold value
to every port on the product.