HP OneView REST API Reference

logical-interconnects
logical-interconnects.html[10/17/2013 10:35:29 AM]
fcTrapCategories: description: Filter the traps for this trap destination by the list of configured Fibre Channel traps
type: array
trapDestination: description: The trap destination IP address or host name
default:
type: string
trapFormat: description: The trap format (SNMP version) for this trap destination
default: SNMPv1
type: string
enum: SNMPv1
SNMPv2
type: description: Identifies the resource type. This field must be set to 'snmp-configuration'.
type: string
description: description: Brief description of the resource
type: string
modified: description: Date and time when the resource was last modified
pattern: [1-2][0-9][0-9][0-9]-([0-1][0-9])-[0-3][0-9]T[0-2][0-9]:[0-5][0-9]:[0-5][0-9](.[0-9][0-9][0-9])?Z
type: string
format: YYYY-MM-DDThh:mm:ss.sssZ
ethernetSettings: description: The Ethernet settings for interconnects contained by a logical interconnect
type: object
Properties
interconnectType: description: The type of the network this will be used for
default: Ethernet
type: string
enum: Ethernet
FibreChannel
readonly: true
status: description: Overall health status of the resource. The following are the valid values for the status of the
resource:Unknown - should be avoided, but there may be rare occasions where status is Unknown; OK -
indicates normal/informational behavior; Disabled - indicates that a resource is not operational; Warning -
needs attention soon; Critical - needs immediate attention.
type: string
igmpIdleTimeoutInterval: description: IGMP snooping idle time out intervals in seconds
default: 260
type: integer