HP OneView Deployment and Management Guide 1.10

Technical white paper | HP OneView Deployment and Management Guide

4. Click the Create button to create the new Ethernet Network and close the Create Network dialog box. You can also

select the Create+ button to continue creating more Networks – e.g. Create the B-Side Ethernet Network.

Creating Fibre Channel Networks

HP OneView supports single-hop FCoE Fabrics with either traditional Fibre Channel Fabric Attach, or Virtual Connect Flat SAN

with HP 3PAR StoreServ Direct Attach. New in the HP OneView 1.10 release, the Virtual Connect Fibre Channel 8Gb modules

are supported, which only support Fabric Attached FC Networks. Please choose the appropriate following scenario to create

either a Fabric Attach or 3PAR Direct Attach Fabric.

Fabric Attached Network

1. From the Top Level Menu, select Networks, then select the +Create Networks button.

First Time

Setup

Configure

Networking

• Create Ethernet

Networks

• Create Fibre Channel

Networks

• (Optional) HP 3PAR

StorServ Direct

Attach

• Network Sets

• Logical Interconnect

Groups

• Enclosure Groups

Discover

Hardware

Upgrade

Firmware

Server

Profiles

Environment

Management

Appliance

Security