HP OneView Deployment and Management Guide 1.10

Technical white paper | HP OneView Deployment and Management Guide

11. The progress window will show you the status of the deployment process.

12. Proceed to the First Time Setup to begin to use your HP OneView appliance

First Time Setup

Completing the HP OneView appliance First Time Setup is designed to be simple and straightforward. By default, the

management interface is configured for IPv4DHCP. If DHCP is not available on the management network you can access the

Kiosk Browser within the VM console from the vSphere Client to complete the initial setup. If DHCP is available, you can

configure the appliance with a browser remotely to complete the First Time Setup. The First Time Setup consists of

Accepting a License Agreement, HP Remote Support Access for remote troubleshooting, changing the default Administrator

account password and configuring IP information.

Prior to continuing with this document, please make sure you have completed the following:

First Time

Setup

• Change

Administrator

password

• Accept EULA

• Remote Support

Opt-in

• Configure Appliance

IP Settings

Configure

Networking

Discover

Hardware

Upgrade

Firmware

Server

Profiles

Environment

Management

Appliance

Security