HP OneView 1.10 User Guide
5. Select User guide.
6. Find the HP BladeSystem Onboard Administrator Command Line Interface User Guide title
and view or download to your local computer.
20.6.3 Disallowed OA commands
The following commands are not allowed in an enclosure configuration script because they conflict
with the appliance configuration and could prevent the appliance from operating properly and
securely.
Disallowed OA commands
SET ENCLOSURE NAMEREMOVE CA CERTIFICATEADD EBIPA
SET ENCLOSURE SERIAL_NUMBERREMOVE EBIPAADD EBIPAV6
SET ENCRYPTIONREMOVE EBIPAV6CLEAR NTP
SET FACTORYREMOVE HPSIM CERTIFICATECLEAR VCMODE
SET FIPS MODEREMOVE OA ADDRESS IPV6DISABLE
DHCP_DOMAIN_NAME
SET HPSIM TRUST MODEREMOVE SNMP TRAPRECEIVERDISABLE EBIPA
SET IPCONFIGREMOVE SNMP TRAPRECEIVER
V3
DISABLE EBIPAV6
SET NTPREMOVE SNMP USERDISABLE FIRMWARE
MANAGEMENT
SET NTP PRIMARYREMOVE TRUSTED HOSTDISABLE HTTPS
SET OA DOMAIN_NAMEREMOVE USER CERTIFICATEDISABLE IPV6
SET OA NAMEREMOVE USER vcmuserDISABLE IPV6DYNDNS
SET PASSWORDREMOVE USERS ALLDISABLE NTP
SET SNMP COMMUNITY READSAVE EBIPADISABLE SLAAC
SET SSO TRUST MODESAVE EBIPAV6DISABLE SNMP
SET TIMEZONESET DATEDISABLE TRUSTED HOST
SET USER ACCESS vcmuserSET EBIPADISABLE USER vcmuser
SHOW ALLSET EBIPAV6ENABLE
DHCP_DOMAIN_NAME
SHOW SYSLOG { OA | HISTORY }SET EBIPA INTERCONNECTENABLE EBIPA
UNASSIGN { SERVER | INTERCONNECT } { <bay
number> | ALL | <bay number range> } vcmuser
SET EBIPA SERVERENABLE EBIPAV6
UNASSIGN OA vcmuserSET ENCLOSURE ASSET TAGENABLE FIRMWARE
MANAGEMENT
20.7 Effects of managing an enclosure
When an enclosure is being managed by the appliance, the following enclosure settings are in
effect:
• A management account is created.
• SNMP is enabled and the appliance is added as an SNMP trap destination.
• NTP (Network Time Protocol) is enabled and the appliance becomes the NTP time source.
20.7 Effects of managing an enclosure 161