HP OneView Deployment and Management Guide 1.10

Technical white paper | HP OneView Deployment and Management Guide
88
policy if specified.
You will be prompted to either install the Remote Console software, or launch it.
Tip
If the Install Remote Console prompt above was cancelled or you need it to show again, select the Actions menu, then hold
the Shift key down and select Launch Console to display the prompt again.
17. Once the Remote Console has launched, you can watch the server POST. The Custom POST message you defined in
the BIOS settings will take affect after the server completes its boot into Intelligent Provisioning.
18. After the server completes it’s POST, the server will be automatically instructed to boot into Intelligent Provisioning to
apply the SPP Baseline.
19. Once the firmware update has completed, the server’s Power State will change to Off. You are now able to install the
OS on your server.