HP OneView 1.10 User Guide

ValueAttribute
2.5 (the default value)Requested bandwidth
Auto (the default value)Port
For both connections, select Not bootableBoot
c. Add one connection to the FC 3 network. Enter the information shown in the following
table, and then click Add + to add the connection and reopen the dialog box for the next
step.
ValueAttribute
Fibre ChannelDevice type
FC 3Network
2.5 (the default value)Requested bandwidth
Auto (the default value)Port
Not bootableBoot
d. Add one connection to the FC 4 network. Enter the information shown in the following
table, and then click Add to add the connection and close the dialog box.
ValueAttribute
Fibre ChannelDevice type
FC 4Network
2.5 (the default value)Requested bandwidth
Auto (the default value)Port
Not bootableBoot
The following illustration shows all the connections added.
Add Connection
Connections
ID Type Address Network
Requested
Port Boot
bandwidth (Gb/s)
.........................................................................................................................
1
Ethernet Auto dev networks 2.5 Auto Not bootable
X
2
Ethernet Auto dev networks 2.5 Auto Not bootable
X
3
Ethernet Auto 2.5 Auto Not bootable
X
4
Ethernet Auto 2.5 Auto Not bootable
X
5
Auto 2.5 Auto Not bootable
X
6
Fibre Channnel Auto FC 4 2.5 Auto Not bootable
X
FC 3
test networks
tsst networks
Fibre Channnel
5. Scroll down to see other items in the dialog box.
6. Configure the boot order for this server profile. Manage boot order is selected by default.
Drag and drop the items so that they are in this order:
A.5 Provisioning eight host servers for VMware vSphere Auto Deploy 301