HP OneView 1.10 User Guide

Table 19 Production networks
VLAN IDName
1101prod_1101
1102prod_1102
1103prod_1103
1104prod_1104
Table 20 Development networks
VLAN IDName
1105dev_1105
1106dev_1106
1107dev_1107
1108dev_1108
Table 21 Test networks
VLAN IDName
1111test_1111
1112test_1112
1113test_1113
1114test_1114
Table 22 Ethernet network configuration values
NotesValueConfiguration attribute
EthernetType
This is the default value displayed on the Create network screen.TaggedVLAN
This is the default value displayed on the Create network screen.2.5 Gb/sPreferred bandwidth
This is the default value displayed on the Create network screen.10 Gb/sMaximum bandwidth
This is the default value displayed on the Create network screen.SelectedSmart link
This is the default value displayed on the Create network screen.Not selectedPrivate network
A.3 Planning the configuration
A.3.1 Planning for installation of the appliance
For the sample data center, assume that you make the following choices before and during
installation:
• You follow the recommendations in the HP OneView Installation Guide, including:
Choosing a physical host for the appliance virtual machine (VM) that is not targeted to
be managed by this appliance
◦
◦ Choosing a static IP address
◦ Ensuring that the ports required by the appliance are available
• You allow support personnel to access the appliance.
278 Step by step: Configuring an example data center using HP OneView