HP OneView Deployment and Management Guide 1.10

Technical white paper | HP OneView Deployment and Management Guide
71
Adding volumes can also be performed from the Volumes section of the UI. The Actions menu will only be available when a
volume exists in HP OneView, either by importing or creating it.
3. Select the Storage System form the dropdown list, then provide the details of the Virtual Volume to import. The
Volume ID is the HP 3PAR StoreServ Volume ID found in the 3PAR Management Console. Select the Add or Add+ button
to add the volume.
Create Storage Volume Templates
Storage Volume Templates allow the Storage Administrator to enforce certain volume parameters when being created.
Storage Volume Templates are not required in order to provision Storage Volumes.
1. Navigate to Volume Templates from the Top Level Menu.