HP OneView Deployment and Management Guide 1.10

Technical white paper | HP OneView Deployment and Management Guide
4
Introduction
Welcome to the Quick Start, Deployment and Management Guide for HP
OneView 1.10. HP OneView provides a simple, consumer-inspired user
experience that dramatically accelerates everyday tasks. By changing the focus
from ‘how devices are managed’ to ‘how people work,’ HP OneView delivers a
software-defined management platform that is extensible and easy to use.
This document will guide administrators through the setup process, and how to
manage the next generation of Converged Infrastructure with HP OneView. The
flow chart below outlines these steps.
HP OneView 1.10 Features
The following list outlines what is introduced in the release:
Table 1. HP OneView 1.10 Features
Automated Storage Provisioning
Add/remove 3PAR storage systems and storage pools
Create/Delete 3PAR volumes on demand
Attach/export 3PAR volumes to Server Profiles
Automated SAN Zoning
Add/remove Brocade fabrics for automated zoning
Zoning is fully automated via Server Profile volume attachment
Quickly and easily establish connectivity from Virtual Connect to 3PAR via Direct Attach
SAN Storage in Server Profiles
Automatically attach private/shared standalone volumes to server profiles and zoen the SAN
fabric or Direct Attach
DL Server Profile Support
For supported rack mount servers, enable the user to apply a profile that specifies an SPP
firmware bundle and configure BIOS policies.
Native FC module support
Manage Native FC connections in the server profile
New Virtual Connect Module
Support
Support for the HP FlexFabric 20Gb/40Gb F8 module
New appliance Hypervisor
support
Provide more hypervisor choices by supporting the deployment of the HP OneView
Management Appliance on Microsoft Server 2008 and Server 2012 Hyper-V
First Time
Setup
• Change
Administrator
password
• Accept EULA
• Remote Support
Opt-in
• Configure
Appliance IP
Settings
Configure
Networking
• Create Ethernet
Networks
• Create FC
Networks
• (Optional) HP
3PAR StorServ
Direct Attach
• Network Sets
• Logical
Interconnect
Groups
• Enclosure Groups
Discover
Hardware
• Import C7000
Enclosure
• Import ProLiant
DL Gen8
• Import 3PAR
StoreServ array
• (Optional) Add
Brocade SAN
Network Advisor
Upgrade
Firmware
• Examine Installed
Firmware
• Manage Virtual
Connect Firmware
Server
Profiles
• Server Profile
Templates
• Managing Server
Profiles
Environment
Management
Appliance
Security
• Create Local User
Accounts
• (Optional)
Configure Active
Directory or
OpenLDAP
• (Optional)
Configure
Directory Groups