HP OneView Deployment and Management Guide 1.10

Technical white paper | HP OneView Deployment and Management Guide

the assignable Server Hardware section.

Note

HP OneView does not currently support Server Profile inheritance. E.g. 1:Many Profile Assignment.

4. Add the needed Network Connections by clicking the Add Connection button, specify an Ethernet Device Type and either

assign an Ethernet Network, or Ethernet Network Set to the Connection. Click the Add+ button to continue adding

Network Connections to the Server Profile.

Note

The Use user-specified IDs is for those customers that wish to provide their own MAC or WWN address for that

connection.

Note

You can specify which FlexNIC to assign the Network Connection to, or leave it at the default of Auto. Auto will apply

the same Network Connection to Adapter mapping Virtual Connect does today. Do know that you cannot create a

FlexNIC B, C or D without first creating FlexNIC A.

5. (Optional) Adding Fibre Channel Networks is a similar operation as an Ethernet Deviec Type. FlexNIC B is reserved for FC

Connections when FC Connection Types are added to the Server Profile. When choosing the FlexNIC, you can leave the