HP OneView Deployment and Management Guide 1.10

Technical white paper | HP OneView Deployment and Management Guide
61
3. In the Add SAN Manager screen, provide the FQDN/IP Address, TCP Port (if different from the default SMI-S/WEBM over
SSL 5989/TCP), and credentials to authenticate. Then click the Add button, orAdd+ button to add another BNA host.
4. After addingthe BNA host, you will notice the managed SAN Fabric names. Automated Zoning is not enabled yet, as the
Managed SAN Fabric will need to be associated with an HP OneView FC Network. The following section will cover these
steps in detail.
Update Fibre Channel Networks
After adding a supported SAN Manager, the Fibre Channel Networks will need to be updated, so they are associated with the
correct Managed SAN Fabrics.
1. Navigate to Networks from the Top Level Menu.