HP OneView Deployment and Management Guide 1.10

ManualsBrandsHP ManualsSoftwareHP OneView incl 3yr 24x7 Supp Phys 1 Svr Lic

Technical white paper | HP OneView Deployment and Management Guide

Table 11. Enclosure Groups Configuration Script Blacklist

ENABLE FIRMWARE MANAGEMENT

SET ENCLOSURE ASSET TAG

UNASSIGN OA vcmuser

ENABLE FIRMWARE MANAGEMENT

SET ENCLOSURE ASSET TAG

UNASSIGN OA vcmuser

ENABLE FIRMWARE MANAGEMENT SET

ENCLOSURE ASSET TAG UNASSIGN OA

vcmuser

Please refer to the Configure an enclosure with an OA configuration script section of the Online Help, or User Guide for an

updated list.

4. Click the Create button to create the Enclosure Group, or Create+ to create the Enclosure Group and additional Enclosure

Groups.

Import Enclosure

In this section, you will go through the process on how to import an enclosure into the HP OneView console. In order to

successfully import an enclosure, the Onboard Administrator must be configured. At a minimum, both the Primary and

Secondary OA must have a valid IP Address, Enclosure Bay IP Addressing or external DHCP Server supplying IP leases, and a

valid Administrator-role account. During the Enclosure Import process, HP OneView will automatically configure SNMP, NTP

and the HP SIM Single-Sign-On Certificate with the HP OneView appliance IP Address and public SSL Certificate. The

Enclosure Import process will also discover any device in the enclosure’s Device Bays, and attempt to configure the

supported iLO ’s for management (SNMP, NTP, HP SIM SSO Certificate, create a special user account _HPOneViewAdmin) and

license the iLO ‘s and servers based on the License Intent setting in the Add Enclosure screen.

If a Virtual Connect Domain exists, the Add Enclosure process will halt and prompt the admin for corrective action.

Table 12. Enclosure Import Checklist

Task

Completed? (Y|N)

Documented Onboard Administrator IP Address or FQDN

Documented Onboard Administrator administrator

credentials

Configured Onboard Administrator settings (EBIPA, Power

Redundancy, etc.)

Warning

HP OneView does not support importing an existing Virtual Connect Domain. If one is present, it will be deleted if you force

the addition of the enclosure into the appliance.

1. Navigate to Enclosures in the Top Level Menu.

First Time

Setup

Configure

Networking

Discover

Hardware

• Import C7000

Enclosure

• Import ProLiant DL

Gen8

• Import 3PAR

StoreServ array

• (Optional) Add

Brocade SAN

Network Advisor

Upgrade

Firmware

Server

Profiles

Environment

Management

Appliance

Security