HP OneView Deployment and Management Guide 1.10

Technical white paper | HP OneView Deployment and Management Guide
18
Table 8. Installation Checklist
Task
Completed? (Y|N)
Have a supported Microsoft Hyper-V or vSphere 5
4
host for
appliance
Have Static IP Address, or DHCP Static Reservation
Have DNS A and PTR Records created
Have NTP Server FQDN or IP Address information
Figure 2. Obtain the Virtual Machine IP Address from the VMware VIClient
As shown in Figure 2., obtain the IP Address of the virtual machine from the vSphere Client, and open a supported Web
Browser to the noted IP Address to complete the First Time Setup. If DHCP is not available, then you can continue the
following steps using the embedded Kiosk Browser, by launching the VMware VM Remote Console or the Microsoft Hyper-V
Remote Console.
If the hypervisor host is Windows Server Hyper-V, then completing First Time Setup must be performed from the appliance
console using the Hyper-V Remote Console.
4
Please review the HP OneView Support Matrix on http://www.hp.com/go/oneview/docs for the officially supported hypervisors.